|
|
 | User's manual (web) - Quickstart (Bose Lifestyle) |  | | |
|
|
Getting started
This quick start guide will focus on configuring a Bose Lifestyle system for use with the RE·BL, to control a PS3. The quick start guide targets the Bose models T10/T20/V25/V30/V35 with software update: 01.01.DP.r9012 (or Higher).
Configure Bose Lifestyle system- Connect the PS3 to HDMI1 of the Bose console.
- Use Unify to name HDMI to PlayStation.
- Select in the setup screen the additional sub-menu: "Manual remote setup".
- Select SONY and Y60772 (alternatively Y0533) as IR-code.
- Press [Save] and exit Unify.
The Bose Lifestyle system is now ready to send the appropriate IR codes to the RE·BL.
Connecting the RE·BL to the Bose console
Plug in the IR transmitter (IR Emitter) to the backside of the Bose console, and stick the IR-LED onto the window on the front of the RE·BL.
Pairing RE·BL with the PS3
Make sure the RE·BL is completely turned off, if batteries are used remove these also (See manual on how to remove or replace batteries).
Turn on your PS3 system and use your PS3 controller to select the following option:
Settings > Accessory Settings > Register BD Remote
Firmware 1.23 (Software 1.19) or higher:
Power on the RE·BL by inserting either batteries, DC adaptor or USB power. When power is applied, the red LED will start flashing to indicate that the RE·BL is entering auto-pairing mode. Do not press any key, RE·BL and the PS3 will automatically pair, and the screen changes to Registering within a few seconds.
Older firmware:
Power on the RE·BL by inserting either batteries, DC adaptor or USB power. When power is applied, the red LED will start flashing to indicate that the RE·BL is ready to be paired. Within the first 20 seconds, press and hold the ‘2’ button on the remote until the PS3 changes screen to Registering.
Now the RE·BL is paired with the PS3 and ready for use!
Read more at Bose's official website .
RE·BL X as well as IR emitter cables are available at the wb_webstore. |
|
|
