RE·BL X - IR to BT converter
to any destination in United States on orders from USD 150 and up!
when ordering before 13:00 (CET + 1) on a normal working day!
Which product to choose?
Pick the right product or kit with the:
- BUYING GUIDE -
IR+Red emitter (single)
Blinking IR emitter. Same as the IR emitter (single), but with a red LED in series with the IR LED, for visible indication of IR transmission.
IR emitter with 3,5mm male mono jack connector and IR emitter housing (8 x 5 x 13mm) with transparent adhesive, connected with a 3m flexible cable. Built in 15 Ohm series resistor for protection against non-limited emitter outputs.
Bag contains 1 extra piece of adhesive.
Pinout: Positive tip and negative sleeve, compatible with most IR distribution network/connection blocks.
IR+RED LED technical specifications: Total Vforward: 1.8Vdc (typ.).
IR LED technical specifications: Vforward: 1.3Vdc (typ.), Imax: 100mA (cont.) - 1A (pulse), wavelength: 940nm (50% intensity at +/- 50nm).
(Please note that an external powersource (DC adaptor or USB cable) is needed when using an external IR emitter with RE·BL.)
©2008-2019 WB Electronics - All rights reserved -