RE·BL X - IR to BT converter
to any destination in United States on orders from USD 150 and up!
when ordering before 13:00 (CET + 1) on a normal working day!
Which product to choose?
Pick the right product or kit with the:
- BUYING GUIDE -
IR+Red emitter (quad)
Blinking Quad IR+Red emitter with one 3,5mm male mono jack connector and 4 x IR emitter housings (8 x 5 x 13mm), all with transparent adhesive. Connected with a durable 2,5m long cable from the jackconnector, the cable splits into 4 thinner 90cm long cables, one for each emitter.
Contains a red LED in series with the IR LED, for visible indication of IR transmission.
Built in 15 Ohm series resistor for protection against non-limited emitter outputs. Bag contains 4 extra pieces of adhesive.
Pinout: Positive tip and negative sleeve, compatible with most IR distribution network/connection blocks.
IR LED technical specifications: Vforward: 1.8Vdc (typ.), Imax: 100mA (cont.) - 1A (pulse), wavelength: 940nm (50% intensity at +/- 50nm).
Perfect for using the RE·BL X as an IR distribution network/repeater in a conceiled setup.
(Please note that an external powersource (DC adaptor or USB cable) is needed when using an external IR emitter with RE·BL.)
©2008-2019 WB Electronics - All rights reserved -